Jun 25,2024
The faucet change is the most familiar among the various refurbishments you can make in your bathroom. Whether the faucet is old, has leakage problems, or you wish to change the appearance of your bathroom, making it look glamorous, then there is no better way to do it than to replace your faucet. If, for instance, you have the skills, equipment, and materials to fix the pipe yourself, then go ahead and do so, but if not, then you should look for a plumber to do the job for you.
In any case, we will help you through replacing the bathroom faucet from the first to the last step.
Whether or not to replace the bathroom faucet depends on its condition, performance, and appearance. Generally, it is time for a replacement if your faucet has worn out and reveals signs, the common ones being a drip, rusty surfaces, or loose and unable-to-tighten handles. It will produce some audible sounds that alert you to a blockage or a crack in the pipeline. Another factor that should also be considered is age; if your faucet is fifteen years or older and already showing signs of degeneration, it should be replaced. A newer, more efficient one will add value to the room regarding looks and usability and reduce the amount of water you waste and the money you spend on that water.
Finally, replacing your bathroom faucet when necessary provides a refreshing makeover to your bathroom space and prevents the havoc caused by a malfunctioning item in the procedure. This means it will be a perfect time to install a new design that you might have fallen in love with instead of the old one that might not really blend with your home's current design or even if you are redesigning the bathroom.
Now, let's proceed to the step-by-step guide on how to replace the old bathroom faucet!
To some, replacing a bathroom faucet may sound like a piece of cake, but if this is your first time fixing it, this is your ultimate guide to the process.
All necessary for the work with the tools and materials should be compiled for the initial stage. To begin the bathroom faucet installation process, you will require a screwdriver, an adjustable wrench, a basin wrench, plumber's tape, silicone caulk, and a replacement bathroom faucet with holes compatible with your bathroom sink.
If you do not possess the right tools or have inadequate knowledge of how to go about it, do not fret. All you need to do is hire the services of a plumber or anyone with adequate knowledge of how to replace a bathroom faucet.
Depending on the model and type of faucet, the water supply to your bathroom sink should be stopped. Locate the shut-off valves for the sink under the sink's platform and twist them clockwise to turn them down. They mostly clog due to rusting or some deposit; they also prove challenging to click shut tightly. Otherwise, you should turn off the main water supply, but before doing so, ensure that everyone in the household is aware of possible sink water shut off.
After that, you should tidy the workplace, intending to put in the new faucet to the sink. It is recommended that you can clean the sink with a mild detergent making sure that there is no obstruction retarding the proper installation of the faucet. In addition to this, you should also clean the sink surface to remove any drippings and old caulking. Cleaning the sink will enable you to replace the bathroom faucet effectively.
Before removing the old faucet, it is advisable to evacuate everything around the sink area to ensure that it does not cause obstruction. Then, with the help of a screwdriver and an adjustable wrench, you can unbolt the mounting bolts and the supply line from the faucet. When undoing the nuts holding the faucet in place and removing the supply lines, approach it carefully when lifting it. When removing, ensure that some towels or a bucket are underneath the sink to avoid calamities such as leakage.
To install it, you need to follow the guidelines provided by the manufacturer who supplied your new faucet set, and you should also ensure that you have purchased all the replacement parts for the bathroom faucet. The faucet tails can usually go through the hole at the underside of the sink after the rubber gasket or seal has been attached to those holes. Screw the provided mounting bolts onto the faucet to secure it at the bottom side.
Connect the nuts to the hot and cold water shut-off valves under the sink through the new supply lines. Turn the nuts with the adjustable wrench without overtightening them, which can damage the supply lines.
Before the final tightening and fixing of the faucet handle and spout, use the plumber's tape to cover all the threaded sections to avoid leakage. This will ensure little or no leakage in the connectors.
As instructed by the manufacturer, ensure you fix the faucet handles and spout correctly to the faucet's base. This type of basin wrench can be used to tighten any hard-to-get-at bolts.
After that, turn on the water supply again and check if any water is dripping. If you find any of them, you can prevent it by tightening the connectors. If this continues and you do not know why, you should hire the plumbing service to check the faucet.
Lastly, apply some silicone caulk to a small size and then run it along the base of the faucet and around the sink where the two meet. This will improve the outlook of the new faucet you are installing and form yet another seal to prevent water from penetrating the area.
With a successful faucet replacement, your bathroom has become the neat and stylish one you longed for. However, it is advisable to consult a professional plumber for insights on faucet installation and help with inspection when encountering challenges in replacing bathroom faucets. For many years, your newly installed magnificent faucet will be your bathroom's functional and aesthetic landmark.
If you wish to transform the bathroom's old look, if you are experiencing leakages, or if you want to give the bathroom a new, stylish, modern outlook, then changing the bathroom faucet would suffice. Nevertheless, doing it yourself can cost less, but it also takes many hours and involves appropriate skills, which may be an issue.
Regardless of your choice, remember your requirements and preferences for long-term enjoyment in the bathroom, and do not hesitate to get a professional to do it for you.
